Start with the body, not the bag
The BodyBag 4/3 is a neoprene cover designed to protect compact camera bodies from nicks, dings, scratches, dust, dirt and the elements. Before you rely on it in the field, confirm that your camera matches the listed fit or falls within the approximate dimensions. The supplied record names specific models and gives a size range, so use that as your first checkpoint rather than assuming a universal fit.
This guide walks through the practical steps for using the BodyBag 4/3 as field camera protection: checking fit, using the closure and front disk, attaching the retaining strap, and storing the camera between shots. Each step is based on what the product record confirms, and I will flag where information is not supplied so you can make an informed decision.
What the BodyBag 4/3 is designed to fit
- BodyBag® 4/3: Designed to fit Point & Shoot cameras like the Leica V-Lux 3, X2; Nikon 1 series; Olympus E-P, E-PL, E-PM1, O-D E-M5, E-M10, E-M10 mkii; Panasonic DMC-G3, DMC-GF1, DMC-GF2, DMC-GF3, DMC-GX1, G series, GF series, GX series; Pentax K-01; Samsung NX Series, NX10, NX100, NX1000, NX200, NX210; Sony NEX series cameras. This list helps you confirm whether your specific camera model is explicitly supported before you buy.

BodyBag® 4/3 - BodyBag® 4/3: Also fits camera bodies approximately 4.75" x 3" x 3.75". If your camera is not named but falls within these approximate dimensions, the cover may still fit; measure your body to check.
How to put the BodyBag 4/3 on your camera
The record does not provide a step-by-step installation procedure, so these steps are a conservative approach based on the product features. Treat them as checkpoints rather than manufacturer instructions.
- Check the fit before you force it: Compare your camera's dimensions to the approximate 4.75" x 3" x 3.75" size or confirm your model is on the list. If your camera is larger, the neoprene may stretch, but the record does not confirm fit for unlisted sizes.
- Open the Velcro closure: The Velcro closure makes storage and access quick and easy. Open it fully to create room for the camera body.
- Slide the camera into the cover: Ease the camera into the neoprene cover, ensuring the front element protect disk is positioned over the lens area if you are using it. The record does not specify orientation, so use your judgment to keep controls accessible.
- Secure the retaining strap: The retaining strap attaches the case easily around the camera strap. Loop it around your camera strap to keep the cover tethered and prevent accidental drops.
- Close the Velcro: Press the Velcro closure shut to keep dust and dirt out. The cover is not claimed to be waterproof, so avoid exposing it to heavy moisture.
Key features that support field use
- BodyBag® 4/3: Made from soft shock-absorbing neoprene, protecting your camera from the nicks, dings and scratches of accidental impact. Neoprene provides cushioning against minor bumps, which is useful when carrying a camera in a bag or on a strap.
- BodyBag® 4/3: Keeps the camera free from dust and dirt as well as protects it from the elements. This helps reduce cleaning and maintains camera condition in dusty or outdoor environments.
- BodyBag® 4/3: Features a removable front element protect disk for extra protection. The disk adds a layer of defense for the front of the camera when stored or carried.
- BodyBag® 4/3: Velcro closure makes storage and access quick and easy, and the retaining strap attaches the case easily around the camera strap. Quick access and a secure strap mean you can protect the camera between shots without slowing down.
Using the BodyBag 4/3 as field camera protection
In the field, the BodyBag 4/3 is most useful as a quick-deploy cover. Keep the retaining strap looped around your camera strap so the cover stays with the camera when you take it off. When you set the camera down or put it in a bag, slide the cover on and close the Velcro to shield against dust and scratches. The neoprene will cushion minor impacts, but it is not a hard case and the record does not claim water resistance, so do not treat it as a substitute for a dry bag in wet conditions.
For storage and travel, the BodyBag is described as great for camera storage and travel. Use the removable front element protect disk when the camera is packed away to add protection to the front. Because the record does not include care instructions, avoid harsh cleaners; a damp cloth is a reasonable default for neoprene, but check with the manufacturer if you are unsure.
Practical camera gear care tips for neoprene covers
The supplied record does not include specific care instructions for the BodyBag 4/3. The following general tips are sensible for neoprene camera covers, but they are not manufacturer directives.
- Keep the cover dry: Neoprene can trap moisture. If the cover gets wet, let it air dry completely before storing your camera.
- Shake out dust: Before putting the camera back in, turn the cover inside out and shake out any dust or grit that could scratch the finish.
- Check the Velcro: Velcro can collect lint and debris. Pick out any buildup to maintain a secure closure.
- Store loosely: Avoid compressing the cover for long periods, which can crease the neoprene. The record does not specify storage requirements, so use common sense.
Color choices for field and travel
The BodyBag 4/3 is available in Black, Forest Green Camo, Realtree Max4, Realtree Max5, Realtree Snow, Digital Camo, Blue, Green, Pink, Purple, Red and Yellow. Color is largely a personal choice, but consider how visible you want the cover to be. Neutral and camo patterns blend in for wildlife and outdoor photography, while bright colors make the camera easier to spot in a bag or on a cluttered surface. The record does not claim any color affects performance.
What to check before you order
Before ordering, confirm your camera model is on the fit list or measure your camera body to see if it falls within approximately 4.75" x 3" x 3.75". The record does not provide a compatibility chart for all cameras, so if your model is not listed and your dimensions are close, the fit is not confirmed. Also note that the record does not specify whether the cover blocks access to ports, buttons or screens; you may need to test access once you receive it. Finally, the BodyBag 4/3 is a soft neoprene cover, not a rigid case, so it is best for protection against minor impacts, dust and dirt rather than heavy drops.


